Very high idle after transmission swap

Discussion in 'General Motoring' started by zoogle, Aug 9, 2004.

  1. zoogle

    zoogle Guest

    Hello,
    I just finished putting a 2000 SW2 back together and fired it up. The
    idle shot up to 4000 rpm and hovered between 3500-4000 for 10 minutes
    after which I shut the car off. Is this a normal re-learn procedure? I
    made sure to plug all of the sensors in as I was putting it back
    together. Any ideas?
     
    zoogle, Aug 9, 2004
    #1
  2. zoogle

    Napalm Heart Guest

    Any possibility that there's a vacuum leak?

    Ken
     
    Napalm Heart, Aug 9, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1995 SL2 idles very high.

  2. 98 SW1 - RPM increase between shifts, high idle problem, engine RPM slow to decrease

  3. misfire/idle high

  4. High idle speeds

  5. high idle speed revisited

  6. High RPM at start & won't start after warmed up

  7. Transmission swap

  8. very fast idle then stall

Loading...