valve body bolts torque

  • Thread starter Thread starter D. Gignac
  • Start date Start date
D

D. Gignac

I, anybody know the upper valve body bolts torue and tansmission cover bolts
torque?

tanks
Denis
 
valve body cover bolts 7.4 ft/lbs
valve body to case 8.1 ft/lbs
transaxle case to converter housing LONG bolts 21 ft/lbs
"" "" SHORT bolts 18
ft/lbs
transaxle connector bolt 27 INCH LBS
transaxle electrical connector bolt 27 INCH LBS

this was from alldata.. for a 97 sl2 hope this give a little help. I
would just sign up at alldata.com for your car.. it's only $25 for the
year and has a wealth of info.
 
Was his car even a Saturn? It could of been a Kia for all we know.

valve body cover bolts 7.4 ft/lbs
valve body to case 8.1 ft/lbs
transaxle case to converter housing LONG bolts 21 ft/lbs
"" "" SHORT bolts 18
ft/lbs
transaxle connector bolt 27 INCH LBS
transaxle electrical connector bolt 27 INCH LBS

this was from alldata.. for a 97 sl2 hope this give a little help. I
would just sign up at alldata.com for your car.. it's only $25 for the
year and has a wealth of info.
Click to expand...

Assuming you guessed the right car, what is the order you torque the
bolts in so you dont distort or bind up the valve body?

Btw one should also mention to use a smooth motion on the torque wrench
and not jerk on it. Also after you finish torquing the last bolt in the
sequence you should return to the first bolt and begin torquing again.
 
blah said:
Was his car even a Saturn? It could of been a Kia for all we know.



Assuming you guessed the right car, what is the order you torque the
bolts in so you dont distort or bind up the valve body?

Btw one should also mention to use a smooth motion on the torque wrench
and not jerk on it. Also after you finish torquing the last bolt in the
sequence you should return to the first bolt and begin torquing again.
Click to expand...

Very good points. I didn't include the info for I really feel that he
should get the manual or subscribe to alldata which gives all that
info.. but I was in a hurry to get to work so I failed to include that
in my message.
 
Very good points. I didn't include the info for I really feel that he
should get the manual or subscribe to alldata which gives all that
info.. but I was in a hurry to get to work so I failed to include that
in my message.
Click to expand...

I know what you mean.
 
You must log in or register to reply here.

Latest threads

Back
Top