Update on SES light lw300

Discussion in 'Saturn L-series' started by Oppie, Sep 22, 2004.

  1. Oppie

    Oppie Guest

    After getting a P0495 code again (evap canister large leak) I changed the
    canister vent solenoid. Evidently cleaning out the old valve was not
    effective. New valve was about $20 from Saturn parts (not available on
    aftermarket). Took about an hour to install including getting the rear end
    up on jack stands.

    It's been a week and the SES lamp is still off. Either this is the fix of
    the controller is not meeting conditions for the test. The code was set in
    hot weather and it has been fairly temperate in NYC this week. Time will
    tell.

    While at Saturn, asked about a locking gas cap. was out of stock but
    available at $26, about the cost of a siphoned tank of gas and far less than
    the cost of a cup of sugar in the tank : (
     
    Oppie, Sep 22, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Update: Electrical and\or Flickering Light Issues

  2. 2000 SL2 -- SES Light -- Will It Pass Inspection

  3. SES light

  4. SES light came on, lw300

  5. SES light came on, lw300 - update

  6. 2001 lw300 SES

  7. 99 saturn, engine light (wrench light) on...update

  8. Saturn VUE SES light and reduced power light on...after stalling

Loading...