trouble starting 2000 SL2

rickett

Usenet Archive
Joined
Dec 7, 2005
Messages
1
Reaction score
0
The SL2 starts when I back-off on the clutch while turning the key in the ignition, which seems to indicate the range for the Starter Safety Switch Operation is compromised. According to the Owner's Manual, the car should start ONLY when the clutch is on the floor. Can anyone help me determine the repair needed?
 
rickett said:
The SL2 starts when I back-off on the clutch while turning the key in the
ignition, which seems to indicate the range for the Starter Safety Switch
Operation is compromised. According to the Owner's Manual, the car should
start ONLY when the clutch is on the floor. Can anyone help me determine
the repair needed? I am having the same problem w/ my 1996. I am also having problems find the part# to replace the safety switch that is bad. I temp. fixed it by bypassing the switch. (un-hooked the connector and pluged a fuse into the end). If you have any luck finding a replacement switch, hook me up and let me know where you found it, PLEASE!
 
Are those switches sealed? Can you not disassemble them and clean the contacts? I'm asking because I'm curious, I never had a reason to look under there.
 

Latest threads

Back
Top