Rear Wiper: 99 SW2

Discussion in 'Saturn S-series' started by Graham Fralick, Sep 26, 2003.

  1. Anyone have a problem with the rear wiper of a 99 sw2.

    Cost involved?

    I think mine is messed in the switch on the wiper control arm....cost of
    arm/repairable by self?

    Any input is welcome...

    Graham
    99 SW2 - Loaded 5 speed - The only way!!!!
     
    Graham Fralick, Sep 26, 2003
    #1
  2. Graham Fralick

    D V Brownell Guest

    If the switch design is like my 95 SW2 then most probally the wires that
    travel down the outside of the switch arm to the main switch body have
    broken at the solder joints, like mine did. I remove the plastic from around
    the steering column and soldered them back on. A little glue to prevent the
    wire from flexing right at the solder joint should make it last longer. The
    transition between a solder joint and the stranded wire fatigues easily and
    should be prevented from flexing for long sevice.
     
    D V Brownell, Sep 28, 2003
    #2
  3. thanks for the tip....i should take a look at it closer and see if i can reveal
    the problem.

    Thanks again...
    Graham
     
    Graham Fralick, Sep 29, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.