quad driver error

Discussion in 'General Motoring' started by David C. Allen, Sep 15, 2004.

  1. I have an intermittent ses light on my 84 sc2. It's mostly when it is 1st
    started up and usually goes away when it warns up. I jumpered the connector
    and it's a 26 error. Quad Driver fault. Can anyone tell me the procedure to
    track down the problem?

    David C. Allen, Sep 15, 2004
  2. David C. Allen

    James1549 Guest

    Generally you get a second code along with the quad driver fault. Making a
    repair to the other code usually clears the quad driver fault. Sorry I can't
    help more. James
    James1549, Sep 15, 2004
  3. I am not getting any other error

    David C. Allen, Sep 16, 2004
  4. The QDM error probably indicates low resistance or a short on one of the
    devices controlled through the ECM. On Saturns, this is apparently usually
    either the EGR vacuum solenoid or the canister purge solenoid that cause
    Robert Hancock, Sep 18, 2004
  5. Is it possible to use a multimeter to test the solenoids? If so can you tell
    me the procedure?

    David C. Allen, Sep 21, 2004
  6. Anyone know how to diagnose the faulty component?
    David C. Allen, Dec 13, 2004
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.