need to fix power window, how do you get ot it?

Discussion in 'General Motoring' started by myrockhead, Jul 30, 2005.

  1. myrockhead

    myrockhead Guest

    I have a sc2 and the passanger front window jumped track I think so I took
    the door panel off and it was all enclosed how do I get to the window
    without messing anything up?
    myrockhead, Jul 30, 2005
    1. Advertisements

  2. myrockhead

    Laz Guest

    can opener
    Laz, Jul 30, 2005
    1. Advertisements

  3. myrockhead

    myrockhead Guest

    I wish it was that easy, thanks for the laugh!
    myrockhead, Jul 31, 2005
  4. have to take panel off the outside not a bad job once you know how ! mirror
    has to come off, outside plastic trim has to come off, outside handle has
    to come off, then you have about 10 plastic screws to take off, take
    mirror off first, then outside trim pry up starting with the rearmost end,
    outside handle has small plastic pushpins you use a small nail to push the
    center of pin in then pull the outside of pushpin out then handle should
    slide off, there are ruber plugs on handle you dont need to remove those,
    then take out the 10 plastic screws, to put the trim back on use a small
    amount of lube on it and slide it back into place. hope this helps !
    justastreekin, Jul 31, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.