leaky back headliner

Discussion in 'General Motoring' started by marx404, Feb 1, 2004.

  1. marx404

    marx404 Guest

    A few months ago, my wife had a new headliner put into her 93 SL1. Now when
    it rains, as it is doing today, the headliner is soaked over the rear
    passenger seat where the glass meets the headliner, and it drips down onto
    the seat.

    I assume that someone was not careful with an upholstery knife and punctured
    a roof seal from the inside?

    From outside, everything looks tight. How can I seal this up so it does not
    leak anymore? Obviously, the rain is getting in from the outside, but from
    where?

    Thanks.
    marx404

    <Outsource Bush!>
     
    marx404, Feb 1, 2004
    #1
  2. marx404

    Glomis Guest

    Actually, it should not have been necessary to use an upholstery knike or
    any other kind of knife to remove the headliner. Of course, that doesn't
    mean that one wasn't used.

    Are there any other reasons you can think of that might be causing the leak?
     
    Glomis, Feb 1, 2004
    #2
  3. marx404

    BANDIT2941 Guest

    Does the car have a sunroof?
     
    BANDIT2941, Feb 2, 2004
    #3
  4. marx404

    marx404 Guest

    No sunroof, and as I said, I there is no visible sign of point of entry for
    the water to come into. washing the car does not cause a leak, only rain
    from a certain angle. I am suspect of somewhere around the window molding
    even though I see nothing.

    marx404
     
    marx404, Feb 2, 2004
    #4
  5. marx404

    kayla711 Guest

    Any reason why you can't take it back to the place that ruined to
    begin with to have them repair it properly? Seems to me you shouldn't
    have to come up with a fix if they warranty their work at all.
     
    kayla711, Feb 2, 2004
    #5
  6. marx404

    marx404 Guest

    That would be smart, but yes, she has taken it back twice and they say they
    have it fixed each time. So I would rather fix it right myself.

    marx404
     
    marx404, Feb 4, 2004
    #6
  7. marx404

    Oppie Guest

    To find leak sources, I pressurize the car interior. Usually just turning on
    the car's blower on high and closing all the windows is good enough
    (recirc=off). Spray or brush soapy water on all the suspected exterior
    surfaces and watch for air bubbles. This finds large leaks. To find smaller
    leaks, add a surfactant to the soap. I use dilute dishwashing soap with a
    bit of alcohol (surfactant) to find tiny leaks in plumbing. This concoction,
    while good for finding small leaks, may damage the painted surfaces.
    Test a small hidden area first. Perhaps someone can suggest a better means.
    Oppie
     
    Oppie, Feb 4, 2004
    #7
  8. marx404

    James1549 Guest

    I use foaming window cleaner to detect leaks around windows. Usually the blower
    on high will work just fine.

    James
     
    James1549, Feb 4, 2004
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.