Leaking battery and clutch assembly

Discussion in 'General Motoring' started by Chet Hoster, Oct 16, 2003.

  1. Chet Hoster

    Chet Hoster Guest

    My 2000-2001 Saturn LS2 starts up fine, but when I go to shift into
    1st it dies the instant I begin to lift up on the clutch. If I give it
    lots of gas, I can get it going and it will work fine for the most
    part (I've had it do this once while sitting at a stop light). I've
    checked the hydraulic clutch fluid, and it is right at the recommended
    level.

    My battery died a horrible leaky death last week, and I can see where
    the black tube coming out of the bottom of the clutch fluid resevoir
    looks to be fairly corroded (not any visible holes though). I've read
    a few posts back where someone says that this assembly comes as a
    single unit for around $120. Am I looking at the right thing to fix
    the problem? Or is there something else I should check before I go
    parts shopping?

    Thanks,
    Katy
     
    Chet Hoster, Oct 16, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2001 Saturn LS200 Rear tail light assembly

  2. 2001 tail light assembly

  3. When The Battery Light Comes On Does This Mean The Battery Is Going Dead?

  4. Many L-Series Woes - Newest is HVAC and Rear Tail light Assembly

  5. New battery but battery light still on

  6. 2001 SL2 Sunroof assembly needed...what do I do?

  7. '96 Saturn SL1 Rack and pinion assembly/slow acceleration question

  8. valve body assembly??

Loading...