Does the PCM control the Traction Control

Discussion in 'General Motoring' started by Lee3333, Nov 14, 2004.

  1. Lee3333

    Lee3333 Guest

    When calibrating a new PCM, do you have to set anything regarding if the
    car is equipped with traction control? Perhaps this is why mine does not
    work after having a new computer installed.
    Lee3333, Nov 14, 2004
  2. Hello i had a problem with abs on 93 saturn , had a bad wire at right rear
    , tried to patch old wire but the wire inside the insulation was
    desentigrating turning to powder, CHEAP wire, Well anyway traction
    controll is controlled by ABS controller that controls IGN, I would think
    if abs works Traction control should work , Try reseting by removing
    negative bat terminal !
    justastreekin, Nov 14, 2004
  3. Lee3333

    Lee3333 Guest

    I just tried disconnecting the battery and it did not help. I will check
    with a local station and ask if the PCM has to be reprogrammed to activate
    the TCS.
    Lee3333, Nov 14, 2004
  4. Lee3333

    DAW Guest

    DAW, Nov 25, 2004
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.