brokeCTS 97 Saturn Continued

Discussion in 'General Motoring' started by localyocal, Mar 8, 2006.

  1. localyocal

    localyocal Guest

    Looking at the old CTS I removed from my SL2 and comparing it to the newer
    Auto Zone (wells) one I recently purchased made me realize the difference
    in quality these have The OES sensor 22.00 is made with much heavier brass
    than the9.00 Auto Zone version.So when and if I get that cheap replacement
    out of my engine. Im definitly gonna put in a OES replacement! I spoke
    with a tech from Wells,he told me to tap right thru the sensor;allowing it
    to drop into the water jacket itself,and just pray it doesnt get tangled up
    in my water pump.I would love some advise from somebody who actually
    removed a CTS themselves.Its difficult to drill into the sensor with wires
    in there.
     
    localyocal, Mar 8, 2006
    #1
  2. localyocal

    blah blah Guest

    I think you mean OEM.
     
    blah blah, Mar 9, 2006
    #2
  3. localyocal

    localyocal Guest

    you're right. OEM
     
    localyocal, Mar 11, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '96 Saturn SL1 114K Miles: Reliability?

  2. Saturn SL1 A/C problem.

  3. Don't Buy a Saturn

  4. 1998 Saturn SW2

  5. from Saturn fan to Saturn Consultant

  6. Saturn is made on Saturn !

  7. oil pressure sender failures: Continued

  8. Good Detroit Free Press Article about Saturn: "Saturn has sharp cars,low profile"

Loading...