98 SC2 Manuak Transmission Problem

Discussion in 'General Motoring' started by projecti, Sep 18, 2004.

  1. projecti

    projecti Guest

    The bottom half of the casting of my manual transmission shattered off
    while driving on the freeway. I assume something inside shot out, unless
    there was some type of extreme metal fatigue. Regardless, the speedo/odo
    are dead, but i have all the gears. I am going to try to swap it out with
    one from a yard and would appreciate any tips or how hard this is if anyone
    has done it before. I am not going to rebuild it, just swap it. Thanks in
    advance.

    Paul
     
    projecti, Sep 18, 2004
    #1
  2. projecti

    WTP07 Guest

    Hey Paul,

    this is not a HUGE project, but I hope you have some mechanical
    experience/aptitude....
    I can be done in your garage, without a hoist, and should be able to be done
    in a weekend.
    If you can lay your hands on a haynes/chilton manual I am sure it can help.

    Feel free to email or post in the NG if you get stuck, but it is pretty
    straightforward.

    Randy.
     
    WTP07, Sep 19, 2004
    #2
  3. projecti

    BANDIT2941 Guest

    The bottom half of the casting of my manual transmission shattered off
    I wrote up a post awhile back outlining clutch replacement. Look that up as the
    steps will be the same.

    Jamie
     
    BANDIT2941, Sep 20, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.