97 SL1 wheel Bearrings

[JOSEPH]

I have a 97 SLY and need to change the front bearings.. any tips? do I have
to use a press to put them in or can I use a socket to press them in? any
other info would be greatly appreciated thanks

 

[MR]

I have a 97 SLY and need to change the front bearings.. any tips? do I have
to use a press to put them in or can I use a socket to press them in? any
other info would be greatly appreciated thanks

I removed my hub and took it to the Saturn dealer to have a new one
pressed in. I had to take it there since it was Saturday and no auto
machine shops were open and I did not have a press. Cost me $92 for
parts and labor. If you have a press you could probably do it
yourself. I am not sure how much the bearing cost.
MR

 

[chuck smoko]

Joe,
I just did this job on an 94 SL1 this past summer. After I
got the spindle off, I took it to a local shop w/ a press. I
would advise doing both sides as the previous year the other
side was done (before I owned it). As spindle removal can
change camber, an alignment check will be needed. So, by
doing both sides you can get away with one alignment. In
addition, my lower ball joint was shot. It is also a good time
to make sure CV joints/boots and suspension bushings are
good.

This car spent 7 years in the Northeast and these kind of parts
take a beat'n there.

chuck