94 SC2 power window motor

Discussion in 'General Motoring' started by raymondj, Jul 17, 2004.

  1. raymondj

    raymondj Guest

    My passenger side window has stopped working (in the down position)
    Before I take the leap and start removing the outer and inner panels.
    Has anyone found the console switch to be defective? I didn't have
    any previous problems of the window intermittinly stopping or any of
    the thunking sounds.

    When I push the switch down I hear a click in the door which tells me
    that juice is getting there. When I pull up on the switch I hear
    nothing.

    I've read tons of stuff here about the various problems with these
    power windows. Sounds like a crazy problem. Some people's gears
    stripped, some people banged on it and it worked, loose bolts, missing
    plastic pieces, multiple motors burning out. Sounds like it will be
    lots of fun trying to figure this one out.
     
    raymondj, Jul 17, 2004
    #1
  2. Had the same problem with my 94SL 2. I can save you a lot of time. You can't
    do anything from the inside of the door. Everthing is access from the
    outside via taking the door skin off. It was quite easy once you get the
    correct torx bit for the large headed bolts.
     
    David C. Allen, Jul 17, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.