92 saturn EGR valve

maconu

Usenet Archive
Joined
Aug 5, 2004
Messages
5
Reaction score
0
Can anyone please tell me the symptoms that let you know the egr valve may need to be replaced? And how do you replace it? Thanks so much
 
Can anyone please tell me the symptoms that let you know the egr valve may
need to be replaced? And how do you replace it?

1) Rough engine idle or won't idle at all

2) SES Trouble code

Remove the air intake tube going from the filter housing to the throttle body. Disconnet the vacuum line at the EGR and remove the two mounting nuts. Remove all the gasket from mounting surface on engine. Replace gasket and install new EGR valve.

James
 
You can trouble shoot your EGR by diconnecting the vaccum lines and plugging them, or crimping them. If the engine still runs rough, it could be something else.
 
On my granddaughters 93 SOHC there is a Y shaped bracket that must be removed before the EGR can be removed. You must take off the two EGR bolts (the bracket prevents removal of the EGR) , then get under the car and after removing the fuel line clip, take the bottom bolt off of the bracket. Remove the bracket, then remove the EGR valve.

Gary
 
You can trouble shoot your EGR by diconnecting the vaccum lines and plugging
them, or crimping them. If the engine still runs rough, it could be something else.

Not completely true, if the EGR valve is not seated properly, then the vacuum check means nothing.

James
 

Latest threads

Back
Top