1994 SL2 Automatic Seat Belt Electrical Problem

Discussion in 'Saturn S-series' started by Keith, Nov 26, 2003.

  1. Keith

    Keith Guest

    I finally replaced the frayed cable in my automatic seat belt for my
    1994 SL2. However, it still does not work. It will only pull the
    belt towards the front of the car when the door is opened. It will
    not pull the belt towards the driver.

    The motor turns both ways when +12V or -12V is applied. There is a
    +12V reading when the belt is going away from the driver, but nothing
    when it should be -12V going towards the driver. The switches appear
    to be good as they switch from 0 to infinity in resistance when opened
    and closed.

    Does anyone know what the problem would be or where I can look? I was
    thinking that perhaps it is an issue with a relay, but I don't know
    how to diagnose it or even test it once I find it.

    I need some help here.... feel free to email me directly at
    . Thanks.

    -Keith
     
    Keith, Nov 26, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. electrical problem with 98 SL2

  2. 1999 SL2 - Automatic transmission problem?

  3. Seat belt locked

  4. 1997 sw2 front passanger seat belt

  5. Seat belt stuck

  6. 95 SL2 Automatic Trans shift problem

  7. seat belt moduel

  8. Help! Electrical problem with 94 sl2

Loading...