1994 SC2

Discussion in 'General Motoring' started by Tom, Oct 17, 2007.

  1. Tom

    Tom Guest

    Hi, i have just installed a Remote Start system in my 94 Saturn SC2, i am
    sure the wiring is correct, I and several ppl have checked it over and we all
    agree it is right. The alarm system and door locks work great, the only
    problem i am having is when i hit the button to start the car the start
    cranks, but the car does not start. Also i cannot start the car using only
    the key. Now the car does start if i get in turn the key to ON and then hit
    the button on the remote to start. The system did not come with any relays,
    therefore i did not install any, is that the problem? The system is a ScyTek
    400RS Series.
    Thank you for the help!
     
    Tom, Oct 17, 2007
    #1
  2. Look at the key:

    See if there is a PK2 stamped on the key. If there is, you'll need a
    security system bypass module.

    RK
     
    Refinish King, Oct 18, 2007
    #2
  3. All that is on the key is the saturn logo and as USA on the back.

     
    Tom1 via CarKB.com, Oct 18, 2007
    #3
  4. Then you have the wiring installed wrong:

    You have to energize the ignition module, the ECM the fuel pump, and the
    injectors for it to start.

    You'll need a good wiring diagram, which tech support for most alarm
    manufacturers have. (Including remote starter manufacturers)

    RK
     
    Refinish King, Oct 19, 2007
    #4
  5. Tom

    Fred Guest

    I had a remote starter installed on my 94 SC2 about 3 years ago. It works
    great! I also had one installed on my Mustang. That one was like yours and
    had problems right away. I took it back and they got it right in a few
    minutes. Must be your wiring is wrong.
    Fred

     
    Fred, Nov 4, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.