02 L200, resetting oil change light?

Greetings all, just purchased an 02 L200 with the 4 cylinder. I do my own oil changes and I can't figure out how to reset the oil change light. It didn't come with an owners manual. Can anyone here help me out? Thanks!

 

If it's like my SL2...

Turn the key to the on/run position (Don't start car)
Observe the "Change Oil Soon" light come on in the self test and then go out
Press and hold the oil change reset button (in the fuse box under the hood)
for about 4 seconds.
The "Change Oil Soon" light should blink for about 10 seconds and then go
out
The Oil Life Monitor has been reset

Cheers!

Glomis

oil changes and I can't figure out how to reset the oil change light. It
didn't come with an owners manual. Can anyone here help me out? Thanks!

 

I just picked up an '01 LW300. Same there too with the reset button under
the main fuse block near the battery...

It may be worth to you to get a replacement owner's manual. I sat and read
it cover to cover last night and there were a few items that were not
intuitive. Well worth having.

Like you, I also change oil and do most of the PM and repairs. I intend to
get the service manuals (~$150) and an OBD2 adaptor for my laptop computer.
I've been looking at the autotap unit.

Happy New Year,
Oppie

--
For valid response address, remove the '1' following oppie
_________________
| Greetings all, just purchased an 02 L200 with the 4 cylinder. I do my own
oil changes and I can't figure out how to reset the oil change light. It
didn't come with an owners manual. Can anyone here help me out? Thanks!
|